Barber Clippers

1. Remove Excess Hair

• Use a clipper brush to remove all visible hair and debris from the blades and housing

2. Disassemble the Blades (if applicable)

• If your clippers allow for it, use a small screwdriver to carefully remove the blades. This helps in cleaning hard-to-reach areas

3. Clean the Blades

• Wipe the blades with a cloth dampened with alcohol to remove any remaining hair, dirt, and grease

4. Disinfect the Blades

• Spray the blades thoroughly with a disinfectant spray designed for barber tools, or immerse the blades in a disinfectant solution like Barbicide. Follow the manufacturer’s instructions for the correct dilution and soaking time, typically around 10 minutes
• If using alcohol, you can soak the blades in isopropyl alcohol (at least 70%) for a few minutes

5. Disinfect the Clipper Housing

• Use a disinfectant spray or a cloth dampened with alcohol to wipe down the entire exterior of the clippers, focusing on areas frequently touched, such as the handle and switches

6. Allow to Air Dry

• After disinfecting, place the blades and clipper body on a clean, dry surface and allow them to air dry completely. This ensures that all disinfectant or alcohol evaporates, leaving the tools safe for use

7. Reassemble the Clippers

• Once everything is dry, reattach the blades securely if you disassembled them

8. Oil the Blades

• Apply a few drops of clipper oil to the blades to lubricate them. This helps maintain their performance and extends their lifespan. Turn on the clippers for a few seconds to distribute the oil evenly

9. Regular Disinfection

• Make it a routine to disinfect your clippers regularly, especially between clients, to maintain a high standard of hygiene and safety

1. Choose the Right Guard

• Guards (or combs) come in various sizes, which determine the length of the cut. Select the guard that corresponds to the desired hair length

2. Start with a Higher Guard

• If unsure, start with a higher guard to avoid cutting too much hair off initially. You can always go shorter

3. Begin at the Base

• Start at the base of the head, moving the clippers against the direction of hair growth. This ensures an even cut
• Use smooth, upward motions. Avoid pressing too hard; let the clippers do the work

4. Blend the Hair

• Switch to a smaller guard to blend different sections of the hair. This is especially important for fades and tapered styles
• Use the comb-and-shear technique for blending: hold the comb parallel to the head, lift the hair, and trim the hair that extends beyond the comb with scissors or clippers without a guard

5. Trim Around the Ears and Neck

• Use a smaller guard or no guard to carefully trim around the ears and neckline. Take your time to achieve a clean edge
• For the neckline, you can use the clippers without a guard to define the line. Be cautious to maintain symmetry

6. Check for Evenness

• Continuously check your work in the mirror and make sure the hair is even. Comb through the hair and look for uneven spots
• Make adjustments as needed, switching guards if necessary to correct any uneven areas

1. Remove Excess Hair

• Use the clipper brush to remove hair from the blades and the casing. Pay special attention to areas where hair can get trapped

2. Disassemble the Blades 

• Some clippers allow for the blades to be removed. Use a small screwdriver to carefully unscrew and remove the blades. This allows for a more thorough cleaning

3. Blow Out Hair and Debris

• Use a compressed air canister to blow out any remaining hair and debris from the motor housing and blade assembly

4. Clean the Blades

• Wipe the blades with a cloth dampened with disinfectant spray or alcohol. Ensure that all hair, dirt, and grime are removed. Then continue to disinfect the blades

5. Oil the Blades

• Apply a few drops of clipper oil to the blades to lubricate them. Turn on the clippers for a few seconds to evenly distribute the oil. This helps in reducing friction and extending the life of the blades

6. Reassemble the Clippers

• If you disassembled the blades, reattach them securely using the screwdriver

7. Wipe Down the Exterior

• Use a soft cloth or paper towel dampened with a disinfectant to wipe down the exterior of the clippers. Ensure all surfaces are clean and sanitised

8. Regular Maintenance

• Make it a habit to clean your clippers after each use to maintain hygiene and performance. Regularly oil the blades as recommended by the manufacturer

1. Disassemble the Clippers

• Use a screwdriver to remove the screws holding the blades in place
• Carefully remove the blades and any other parts that come off with them

2. Clean the Blades

• Use a small cleaning brush to remove any hair, dirt, or debris from the blades
• Wipe the blades clean with a cloth or paper towels

3. Sharpen the Blades

• Wet the sharpening stone with water or oil, depending on the type of stone
• Hold the blade at the correct angle, usually around 30-45 degrees, against the stone
• Move the blade in a smooth, consistent motion across the stone. This can be done in a back-and-forth or circular motion
• Repeat the process for the other blade if necessary
• Perform several passes, typically around 10-15, depending on how dull the blades are

4. Check the Sharpness

• After sharpening, check the blades by feeling the edge (carefully) or by testing them on a piece of paper or hair to ensure they are sharp

5. Clean and Oil the Blades

• Wipe the blades clean to remove any metal filings or debris from sharpening
• Apply a few drops of blade oil to the blades to ensure they move smoothly and prevent rust

6. Reassemble the Clippers

• Reattach the blades to the clippers, ensuring they are aligned correctly
• Tighten the screws securely but not overly tight to avoid damaging the threads

You should disinfect your clippers after every client, this is to ensure that you aren't passing on any germs from person to person

Barbers typically use a few well-regarded brands of clippers that are known for their reliability, durability, and performance. The most popular brands among professional barbers include

1. Wahl: Known for its versatile and high-quality clippers, Wahl offers a range of products from corded to cordless options
2. BaBylissPRO: Offering advanced technology and sleek designs, BaBylissPRO clippers are popular for their performance and aesthetic appeal

These brands offer a range of clippers designed to meet different needs, from fading and tapering to general cutting.

Barbers use several solutions to clean and disinfect clippers, ensuring hygiene:

1. Clipper Disinfectant Sprays:

• WAHL Hygienic Clipper Spray: keeps blades clean and bacteria-free

2. Blade Wash:

• Wahl Blade Ice: Cleans, cools, and disinfects blades

3. Alcohol-Based Solutions:

• Isopropyl Alcohol: Kills germs, used by dipping or wiping blades

4. Barbicide:

• Used for disinfecting clipper attachments and blades

5. Clipper Oil:

• Lubricates and prevents rust and debris buildup

6. Soap and Water:

• For basic cleaning of attachments; blades must be dried and oiled afterwards

Choosing the best barber clippers depends on your specific needs, but here are some highly recommended options based on professional reviews and user feedback:

1. Best Overall

• Wahl Professional 5-Star Magic Clip
• Versatile, high precision, cordless with a long battery life, adjustable taper lever

2. Best for Fading

• Wahl Gold Magic Clip Cordless Clipper
• Powerful motor, adjustable taper level and stagger tooth blade

3. Best Corded Clipper

• WAHL Legend Mains Clipper
• Includes 10 attachment combs, powerful V9000 motor for al day cutting

4. Best Budget Option

• WAHL Pro Clip Professional Corded Clipper Set
• 2.4m cable, adjustable taper level, 40mm cutting width for high precision
• Included in the box are a Blade Guard, 4 Attachment Combs (#1 - #4), Clipper Oil and Cleaning Brush

5. Best for Cordless Use

• Wahl Legend Cordless Clipper
• Adjustable lever, crunch blade technology, fading wedge blade for better fade and blending capabilities

When selecting clippers, consider factors such as

1. Motor Power: A powerful motor can handle all hair types and textures
2. Blade Quality: High-quality blades ensure a cleaner cut and longer-lasting sharpness
3. Corded vs. Cordless: Cordless clippers offer mobility but consider battery life and charging time
4. Weight and Ergonomics: Lightweight and well-balanced clippers reduce hand fatigue during extended use

Attachments and Accessories: Additional guards and attachments increase versatility

Barbers often use high-quality clippers for fades to ensure precision and efficiency. Some of the most popular clippers among professionals for creating fades include:

1. WAHL Magic Clip 5 Star Mains Clipper

• Adjustable taper level
• Includes 8 attachment combs
• Powerful V5000 motor for all-day cutting

2. WAHL Senior Cordless Clipper

• 70-minute charge time
• Adjustable taper level
• Includes 10 premium attachment combs

3. Wahl Legend Cordless Clipper

• Wide-range fading wedge blade for better fade and blending capabilities
• Crunch blade technology for unique cutting angles and seamless blending
• Convenient thumb adjustable lever for easy taper and texture adjustments without changing blades

As a leading online retailer, Hairdressing Supplies is a top choice, we offer a wide range of barber tools from top brands like WAHL, Babyliss Pro and many others. 

We’re committed to offering competitive pricing and excellent customer service. This makes us a go-to destination for professional hairdressers and salon owners looking to purchase high-quality products online.